YouFirmware

Stock ROMs & Flash Files

How To Flash Stock Rom For Motorola Moto G Devices Tutorial

Here You Can Find Complete Guide For How To Installation Stock Firmware For Motorola Moto G Devices Tutorial Please Make a full Nandroid Backup Before installing the Stock Firmware..

MAKE BACKUP OF YOUR FILES, FOR FOLLOWING
THIS TUTORIAL YOU LOSE WHAT YOU HAVE SAVED.
REMOVE MEMORY CARD AND CHIP TO CONTINUE.

Tutorial – For Flashing Stock Firmware Moto G (Roms Retail) by Fastboot

Before you start you need to unlock the bootloader .
01. To install download the files for installation , click right in rar and Extract toTutorial Installation Motorola .”
02. Install Motorola Drivers on your computer (MDM Installer for Mac or Motorola Device for Windows)
02.1  Enable USB Debugging
02.2  Plug the phone to recognize and install all drivers
03. Click with the right mouse button on 02. Adb Fastboot + Mfastboot-v2 and choose “Extract here”.
04. Remove the ROM Retail your MOTO G into the folder ” 02. Adb Fastboot + Mfastboot-v2 “
05. Once extracted the files, open the folder 02. Adb Fastboot + Mfastboot-v2 .
06. Inside the folder hold the “SHIFT” key and right-click-click any empty space of the window ( SEM SELECT FILE NO ) and go to ” CONTROL WINDOW OPEN HERE .”
07. Turn off the phone, turn it PRESSING “POWER + VOLUME -” ALL TOGETHER by +/-
5/2 until the screen “AP Fastboot Flash Mode.
08. Connect the USB cable (IF DRIVERS WERE INSTALLED PROPERLY APPEAR INQUIRY:
“Fastboot Reason: Reboot to Bootloader
USB connected “
–IMPORTANT–
it did not appear the message, reinstall the drivers from motorola on the computer.
09. Go in the command window that is open and enter command by command:
These TWO DOWN commands, the message of “failed”, but can proceed normally:
Wait each finished loading command
mfastboot.exe flash partition gpt.bin (press enter)
mfastboot.exe flash motoboot motoboot.img (press enter)
mfastboot.exe flash logo logo.bin (press enter)
mfastboot.exe flash boot boot.img (press enter)
mfastboot.exe flash recovery recovery.img (press enter)
mfastboot.exe flash system system.img_sparsechunk.0 (press enter)
mfastboot.exe flash system system.img_sparsechunk.1 (press enter)
mfastboot.exe flash system system.img_sparsechunk.2 (press enter)
mfastboot.exe flash system system.img_sparsechunk.3 (press enter)
mfastboot.exe flash system system.img_sparsechunk .4 (to enter)
mfastboot.exe flash system system.img_sparsechunk.5 (to enter)
mfastboot.exe flash NON-HLOS.bin modem (press enter)
mfastboot.exe erase modemst1 (press enter)
mfastboot.exe erase modemst2 (give enter)
mfastboot.exe flash fsg fsg.mbn (press enter)
mfastboot.exe erase cache (hit enter)
mfastboot.exe erase userdata (press enter)
mfastboot.exe reboot (press enter)

Copyright @ 2018-19 youfirmware