How to Flash or Update Stock Firmware Using LiveSuit Application | YouFirmware

YouFirmware

Stock ROMs & Flash Files

How to Flash or Update Stock Firmware Using LiveSuit Application

These are the Complete instructions to How to Flash or Update Stock Firmware on Android Smartphone using LiveSuit Application.

Before Installation Requirements: Your Device should have at least 30 to 40 percent of battery to perform the Installation Process.

How to Flash or Update Firmware Using LiveSuit Application

No 1: Download & install Android Latest ADB Drivers on your computer.

No 2: Download & extract LiveSuit Application on your PC. After Extracting the files, you will be able to see the following files:

No 3: Now Locate the LiveSuit.exe from the extracted data.

No 4: Once LiveSuit.exe is Fully Launched, Select Yes to follow the Upgrade Wizard.

No 5: Now, You have to choose the Upgrade Mode which is General & Mandatory. Press Mandatory Option to continue.

No 6: Now, Time to Unplug all the connected devices $ tablets from the PC or Laptop (if your Device is already connected), then Press Yes button Option to Continue.

No 7: Next, You have to Choose the .img firmware or ROM. If you are ready Press Yes Button Option and select the firmware.

No 8: Now, Do not Click on Finish Button Option.

No 9: Now, It’s time to connect your Android Device or Tablets to the Computer or PC using USB Data Cable. Before Connecting the Android Phone, make sure its Switch Off.

1stly Connect the USB Data Cable to the PC than on your Android Smartphone Press the Volume Down Key & Connect the USB Data Cable to it. While holding the Volume Down Button Quickly Press Power Button for ten times, so that the PC can recognize your device.

No 10: Once your computer successfully recognizes your Android Device, you will be able to see the following Window saying to Mandatory Format the Device. Click Yes to Continue.

No 11: On the next Windows Tab, again Press Yes Button to continue.

No 12: Now LiveSuite will Begin the flashing process (flashing usually takes 5 to 8 minutes to fully complete).

No 13: Once Installation is completed successfully then you will be able to see Upgrade Succeeds Window Option. Click OK to Exit it.

No 14: Now, Time to close LiveSuit Application by press Exit Button.

No 15: Disconnect your Android phone from the Computer & Restart it.

Congratulations, Your Device is Fully Updated to latest Stock Firmware Using LiveSuit Application.

YouFirmware © 2018 Frontier Theme